What is it?
atLEAFSoft
software is a powerful tool oriented to the analysis of the plant parameters. It allows to transfer, display, store and analyze plant
parameters, curves and spider plots. The software fully supports atLEAF CHL PLUS and BLUE devices through USB port
allowing the download of measurement data, upload of species names and support of specific device available functions.
Software versions
|
FREE
|
With the free (not registered) version of software you can download measurements, upload species names or calibrate any atLEAF
device with USB port.
|
|
PRO
|
Through purchasing the PRO license of the software you obtain the USB dongle and you have access the
full functionalities.
|
Please read the table below to see in detail the available functions for each software version
Main functions
|
atLEAFSoft Free |
atLEAFSoft PRO |
| Download measures from atLEAF device and save them in CSV (text) format |
v |
v |
| Upload names/labels from PC text file to atLEAF device |
v |
v |
| Download and display info and parameters stored in atLEAF device |
v |
v |
| Read date and time of the atLEAF device |
v |
v |
| atLEAF device calibration (when available for specific device) |
v |
v |
| Display values of atLEAF device measurements counters |
v |
v |
| Download atLEAF device names to PC |
- |
v |
| Sync date and time of the atLEAF device with PC time |
- |
v |
| Read temperature, date and time associated with measurements |
- |
v |
| Open and store ADAT files |
- |
v |
| Open and store CSV files with measurement parameters |
- |
v |
| Download measures from atLEAF devices and save them in ADAT format |
- |
v |
| Display measurement parameter graphs |
- |
v |
| Display tables with measurement parameter data |
- |
v |
| Create, display and store Spider Plots |
- |
v |
| Read and set multiplication factor and offset for atLEAF CHL measures |
- |
v |
| Read and modify lower and upper limits of measurements for the API (AtLEAF Performance Index) calculation |
- |
v |
| Command, download and display measures in real time through USB |
- |
v |
| Perform, download and display measures with a selected period through USB |
- |
v |
| Program, download and display automatic sequences of measures through USB |
- |
v |
| Change device language |
- |
v |
| atLEAFGeo module: maps, histogram, regression, trends (some functions available with geo data acquired through atLEAF app and CHL BLUE device only) |
- |
v |
(*) A maximum limit of 100 parameters
is set in the atLEAFSoft Evaluation version
No more than one atLEAF device can be connected at each time.
atLEAFSoft PRO
If the license is purchased without having an atLEAF device, a Device SN to register on the Signup page
will be given with dongle.
System requirements
|
Operating System
|
atLEAFSoft ≤1.27: Microsoft Windows Vista, Windows 7, Windows 8.1 or Windows 10
atLEAFSoft ≥1.28: Microsoft Windows 7SP1, Windows 8.1 or Windows 10 and NET Framework ≥4.5.2
Installation Setup for Windows Vista is available in the download section.
|
|
USB ports
|
Free version: one port is needed to connect the atLEAF device.
PRO version: two ports, one for device and the second for License Dongle
|
|
Display
|
1024 x 768, larger resolution recommended for PRO version
|
Warning: Using the new atLEAF devices with the older UsbInt software may cause unpredictable results,
including possible damage to the device.